Double Wall Panel Extrusion Machine
The JQT double light partition wall panel extruder can produce two
light partition wall panels with a span of 600mm at the same time,
which improves the production efficiency and the utilization rate
of the site.
This machine integrates the multi-processes of cloth, vibration,
forming and demoulding produced by
lightweight partition board: the main motor transmits the power to
the reduction box through the pulley,
and the output shaft of the reduction box drives the spiral
stirring knife in the frame (wall Plate), vibrator
and pedestal constitute the forming cavity to rotate; the light
mixture from the hopper is continuously
conveyed to the forming cavity, and the light mixture is squeezed
by the spiral stirring knife in the forming
cavity and the vibrator is continuous Under the dual action of
vibrating, it produces resonance and is
continuously squeezed and compacted, and reaches the required
shape, size and compactness. At the
same time, the vibrated and compacted strip produces a reaction
force against the rotating stirring knife,
pushing the extruder continuously Advance to achieve continuous
|Double panel||H(mm)||W(mm)||No. of hole||Dia of hole(mm)||(m/min)||Motor||Vibrator||L*W*H(cm)||kg|
1. One machine with double panels improves production efficiency.
2. The board density is uniform, which changes the situation that
the board at the boundary between
the left-handed and right-handed knives has low strength and is
easy to crack from there after assembly.
3. High mechanical degree; full hydraulic lifting. Saving raw
materials: Broken steel wires can be manually
connected and used; the produced slats can be produced to reach the
end reinforcement, so that there
is no waste of steel and mixed materials at the end of the
pedestal, and the utilization rate of the pedestal is improved.
4. Channel steel track can be omitted, saving the cost of making
the pedestal, reducing the difficulty of
production, and improving the precision of production.
5. Long service life, the main wearing parts can be more than
80,000 meters, the vibration plate can be
more than 100,000 meters, and the side wall board can be more than